2 Stroke Mix Ratio Tips to Get the Correct Measurement

0

Those who have the passion in the auto or vehicle world must be familiar with the right portion of 2 stroke mix ratio. Why does it matter? Because you want to be sure that you have done the right thing – most importantly, you are doing the right calculation with the mix so it doesn’t go less or over the expected ratio. Having less or excessive mix can lead to expensive damage or even dangerous condition.

Knowing the Basic Facts

2 Stroke Mix Ratio Tips
2 Stroke Mix Ratio Tips

Be sure that you are doing the proper and correct fuel. You don’t want to go wrong with the combination of oil and gas. Why with the oil, anyway? It is needed to lubricate the internal parts, which is essential in the running and the operation of the machine. But then again, the key is to know the right proportion of the fuel and the oil. The ratio is mostly 50:1 in the standard case, but each engine has its own specs and requirements. If you don’t want to make mistakes in the 2 stroke mix ratio, it doesn’t hurt to pay attention to some of the basic elements in managing the fuel.

Handy Tips and Tricks

2 Stroke Mix Ratio Tips
2 Stroke Mix Ratio Tips

So, what should you do to make sure that the mix is correct?

  • Always read the manual. Product’s manual is your guidance book; you should be able to find extra info there, including the matter of fuel and its mixture. But what if you lose the manual? No need to worry.  Go online and browse around for the type of engine you want. You should be able to find the information there.
  • Choose the container. It is crucial that you use the correct container. It would be better if you don’t use just about any container – it would have been better to choose a container designed for gas and it is regulation approved, which means that it has been designed according to the standard issue. A special designed container will prevent evaporation, permeation, or reduce spilling.
  • Choose quality. It is pretty understandable how people choose price over quality, but when it comes to your safety, such a thing isn’t advisable. If you want to play it safe, go with the high quality gas – choose the premium one. The recommended one is the one with at least 89 octane rating and unleaded mid grade gas. Too low octane rating may make the engine go hot because it increases the temperature. When it happens, you will deal with piston seizure possibility, leading to engine damage. Choosing the high quality oil is also recommended so everything will be balance.
  • Consult a chart. Although a lot of people say that the 2 stroke mix ratio is 50:1, you will never know the exact measurement unless you use the right container. There is a chart that can help you with the exact proportion. You may want to download it before starting mixing.

Further Steps

Those are the prep stage before you start the mix. Now that you already know the 2 stroke mix ratio, you can pour the oil first. Use a canister to accommodate it. Then add the gas, close it, and then shake it hard. Shaking it will ensure proper mixing. Don’t forget to shake because it is important. You also want to make sure that everything is clean so there won’t be any dirt falling to the gas tank. Don’t stand too close or you may inhale the fume.

That’s it. The mix should be enough only for a few days, while the fuel storage shouldn’t be more than 3 months. Know that you already know about the facts of mixing fuel and the 2 stroke mix ratio, you can be extra careful about it.

 

Leave A Reply